The data included in this prospectus regarding the industry in which we operate, including descriptions of trends in the market and our position and the position of our competitors within our industries, is based on a variety of sources, including independent publications, government publications, information obtained from customers, distributors, suppliers, trade and business organizations and publicly available information, as well as our good faith estimates, which have been derived from managements knowledge and experience in the industry in which we operate. The industry data sourced from the U.S. Energy Information Administration, or the EIA, is from its publications titled Annual Energy Outlook 2018, published in February 2018, and Short-Term Energy Outlook, published in August 2018. The industry data sourced from Baker Hughes Inc., or Baker Hughes, is from its publication titled Baker Hughes North America Rotary Rig Count, published in August 2018. The industry data sourced from Coras Research, LLC, or Coras Oilfield Research, is from its OFS Data Packet, published in the second quarter of 2018. The industry data sourced from Preston Publishing Co., or Preston Pipe, is from its report titled Preston Pipe & Tube Report, published in July 2018. The industry data sourced from Rystad Energy Inc., or Rystad Energy, is from its publication titled Shale Trends Report, published in July 2018. The industry data sourced from Spears & Associates, Inc., or Spears & Associates, is from its publications titled Drilling and Production Outlook, published in March 2018 and June 2018, and its publications titled Oilfield Market Report 20062018, published in April 2018, and Global Directional Drilling, published in the fourth quarter of 2017. We believe that these third-party sources are reliable and that the third-party information included in this prospectus and in our estimates is accurate and complete; however, we have not independently verified such information. The industry in which we operate is subject to a high degree of uncertainty and risk due to a variety of factors, including those described in the sections entitled Forward-Looking Statements and Risk Factors. These and other factors could cause results to differ materially from those expressed in these publications.
This report provides pin-point analysis for changing competitive dynamics It provides a forward looking perspective on different factors driving or restraining market growth It provides a six-year forecast assessed on the basis of how the market is predicted to grow It helps in understanding the key product segments and their future It provides pin point analysis of changing competition dynamics and keeps you ahead of competitors It helps in making informed business decisions by having complete insights of market and by making in-depth analysis of market segments
Abstract: A process for the manufacture of 1,1,3,3-tetrachloropropene, the process comprising dehydrochlorinating 1,1,1,3,3-pentachloropropane.
Draft No. VIII WGAE REG.NO.R07960-00 For Carrie Chapter One Below the thunders of the upper deep Far, far beneath the abysmal sea His ancient, dreamless, uninvaded sleep The Kraken sleepeth… Alfred, Lord Tennyson
North Texas is a big place, with plenty of opportunities. So, we’re constantly on the lookout for contests and competitions, award ceremonies, and available grants our innovators can apply for. …
While Portman had “heard the rumors about Harvey throughout the years, and took them as truth,” consequently keeping her distance, she didn’t know specifically “who it had happened to.” She learned to whom and to what degree “when everyone else did. . . . We’re in a culture where it is regular for men to behave badly and for women to be hurt,” she says, adding that men can be victims, too. “But it is a complete shift because all of us were like, ‘Oh, God, he’s a bad dude,’ and now it’s ‘No, this is abusive behavior—not just a bad dude.’ ”
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or an emerging growth company. See the definitions of large accelerated filer, accelerated filer, smaller reporting company and emerging growth company in Rule 12b-2 of the Exchange Act.
On July 22, 2015, the FASB issued ASU No. 2015-11, Simplifying the Measurement of Inventory (ASU 2015-11). ASU 2015-11 requires an entity to measure most inventory at the lower of cost and net realizable value, thereby simplifying the current guidance under which an entity must measure inventory at the lower of cost or market. ASU 2015-11 does not apply to inventories that are measured using either the last-in, first-out (LIFO) method or the retail inventory method. ASU 2015-11 is effective for public entities for financial statements issued for fiscal years beginning after December 15, 2016, including interim periods within those fiscal years; early application is permitted. The Company elected to adopt the standards update beginning January 1, 2015.
Trays up to 6 feet wide and 20 feet long can be loaded with potted plants in the work area, then transported by cart or conveyor to the growing area. The trays can be moved back to the work area for spacing, maintenance or harvesting. The roller conveyor system uses flat bottom trays that ride on trolley wheels or fixed casters attached to support rails. In a second type of system, the rollers are attached to each tray and ride on the pipe rails. A low-cost transport cart can be used to move the trays from the propagation area to the veg spaces, then to flower areas. An alternate manual system uses rails with attached plastic trolley wheels.
Get Exclusive FREE Sample Copy Of this Report- https://marketdesk.us/report/global-galvanized-pipe-fitting-market-2018-99s/#requestForSample
A pipe that builders are using inside homes more and more is coming under fire by the people who know best — professional plumbers.
Inventor(s): Howard C. Choe (Southlake, TX), James P. Edmiston (Allen, TX) Assignee(s): Raytheon Company (Waltham, MA) Law Firm: Renner, Otto, Boisselle Sklar, LLP (1 non-local offices) Application No., Date, Speed: 15068026 on 03/11/2016 (795 days app to issue)
Build Industrial Furniture With Wood And Pipes | Pipe Nipple Related Video:
Our company sticks into the basic principle of "Quality is definitely the life of the business, and status may be the soul of it" for 1/8"-6", Khớp nối gang, 45 Degree Elbow Đối với đường ống dẫn nước, we are sincerely hope to establish one good long term business relationship with your esteemed company thought this opportunity, based on equal, mutual beneficial and win win business from now till the future.